Redmine: Issueshttp://redmine.audacious-media-player.org/http://redmine.audacious-media-player.org/welcome/favicon.ico?15159353402024-02-22T11:30:37ZRedmine
Redmine Audacious - Feature #1222 (New): Swedish characters in Winamp bitmap fontshttp://redmine.audacious-media-player.org/issues/12222024-02-22T11:30:37ZOctane NA
<p>In Audacious' appearance settings it does say that only ASCII is supported if you use the bitmap fonts from a Winamp skin. And this is true as far as Audacious support goes.<br />However, in every single Winamp skin I've looked through, the font contains the Swedish characters ÅÖÄ at the bottom. It's unclear why only Swedish is supported in addition to ASCII while other larger languages go unsupported, and it's also unclear why they're in that order. However, since they are included, wouldn't it be reasonable to support these in addition to ASCII?</p> Audacious - Feature #1196 (New): Snap to the bottom of the screen when rolling up player windows ...http://redmine.audacious-media-player.org/issues/11962022-10-10T04:21:31Zr c
<p>Hi</p>
<p>If you have the player in shade mode (rolled up), and press the roll down button, if there is enough room below the player, the player will expand downwards as you'd expect. If there's not enough room below the player, it will expand upwards. This is good, logical behavior.</p>
<p>However, if you have the player at the bottom of the screen and and the player expands up, when you click the "roll up" button to return to shade mode, the player doesn't return to the position where it previously was and you have to manually move it back.</p>
<p>I can't have Audacious at the top of my screen because it blocks my browser tabs, so each time I need to expand the player or playlist and roll it back up, I also have to move it back where it belongs.</p>
<p>See the attached screen recording.</p>
<p>Thank you :)</p>
<p>(In the recording, you will also notice a separate, strange issue where the playlist is drifting to the left and overlapping the player)</p> Audacious - Support #1182 (New): UI Qt mode : Icons theme is not correctly restored between sessi...http://redmine.audacious-media-player.org/issues/11822022-08-23T11:47:51ZNicolas Molunier
<p>Hi<br />Audacious 4.2<br />Setting icons theme to "uni (dark)" is incorrectly restored after quit & restart.<br />Note that the "settings dialog" shows to correct selected theme but mismatch with the one displayed (see picture)</p> Audacious - Support #1178 (New): text inside the "Song Info" window is glitching outhttp://redmine.audacious-media-player.org/issues/11782022-08-06T11:29:43ZAlex .
<p>Hello,</p>
<p>I found some problems reading the song info (ID3-tags, metadata) of tracks with long comments.</p>
<p>The moves to reproduce:<br />1. create or download a file with a huge comment e.g. long track-list<br />2. open the song info and scroll down to the comment field<br />3. slowly scroll further down<br />-> the field is only shown as long as its firth line is visible and jumps straight towards the next field as soon this line disappears<br />4. scroll back (upwards) to the comments field, now use your windows-manager to maximize or increase the song info window<br />-> as bigger the window becomes as more of the comments field gets visible; still not sufficient for very long comments (some live-sets have over 120 lines)</p>
<p>What I also noticed:<br />- the comments field is the only one without a title<br />- clicking on the comments field makes it instantly disappear<br />- on the windows version, the comments field is single-lined<br />and further<br />- some ID3-field are completely missing i.g. "group", "bpm" and "keywords" <br />- you can't edit any song-info (feature request)</p>
<p>Expected behavior:<br />- set the comment field to the end of the ID3 section (maybe move the technical section on top or into a separate tap)<br />- make the comment field scroll-able (maybe a separate scroll-bar for an easy fix)<br />- make the comment field multi-lined (Win64)<br />- optimally: make the ID3/metadata editable</p> Audacious - Feature #1134 (New): Web interface remote controlhttp://redmine.audacious-media-player.org/issues/11342021-11-04T06:57:56ZSheng Yu
<p>Sometimes I want to control what I am listening without waking up the computer. If there is a plugin which servers a website to local network so that I can visit it from my phone to control my music on PC.</p>
<p>I found this project that works for foobar2000 and deadbeef<br /><a class="external" href="https://github.com/hyperblast/beefweb/">https://github.com/hyperblast/beefweb/</a></p>
<p>Can we implement something similar or integrate audacious with beefweb project?</p>
<p>Thanks.</p> Audacious - Feature #1047 (New): Stop playing after any chosen trackhttp://redmine.audacious-media-player.org/issues/10472020-12-29T01:23:06ZNelson Suniaga
<p>The "Stop after this song" feature does as it says: stop the playing on the currently played track, but more often than not, the listener wants to stop the playing some track ahead, like the last song of an album or an artist selection.</p>
<p>Amarok has a feature like that, displaying a little black square aside from the chosen track name. It would be nice if Audacious had an option like that.</p> Audacious - Bug #1014 (New): Some .VGM/.VGZ files fail to playhttp://redmine.audacious-media-player.org/issues/10142020-08-05T22:32:04ZBail Shamber
<p>"DOOM vgm" and "skyroads vgm" files (can be obtained from the first google search result) fail to play on audacious using the "Game Console Music Decoder" plugin, while they do play in deadbeef and foobar2000.<br />Some other vgm files play fine such as road rash for the sega genesis "road rash vgm" first google result.<br />I'm using the flatpak version, btw.</p> Audacious - Feature #1011 (New): Visible separator of folders in the playlisthttp://redmine.audacious-media-player.org/issues/10112020-07-18T16:10:04ZDo Evo
<p>if I drag folder labeled Tool with 5 subfolders in it,<br />it might be nice to have some grouping,<br />some indication of where in the playlist one subfolder ends and another begins.</p>
<p>here are examples how it looks in deadbeef or windows aimp3</p>
<p><img src="https://i.imgur.com/nXhTvQ3.png" alt="" /><br /><img src="https://i.imgur.com/nXhTvQ3.png" alt="" /></p> Audacious - Bug #973 (New): "snd_pcm_recover failed" alsa error and "String leaked" warningshttp://redmine.audacious-media-player.org/issues/9732020-04-21T17:56:37ZIgor Kushnir
<p>Steps to reproduce:<br />1. Enable Song Change Audacious plugin and set its <em>Command to run at the end of the playlist</em> to:<br /><pre><code class="ruby syntaxhl"><span class="CodeRay">bash -c <span class="string"><span class="delimiter">"</span><span class="content">sleep 0.1 && audacious -p -E '/usr/share/sounds/alsa/Front_Center.wav'</span><span class="delimiter">"</span></span>
</span></code></pre></p>
<p>2. Set Audio Output plugin to <em>ALSA Output</em>.<br />3. Disable all Repeat and Shuffle options in Audacious to let the configured Song Change command run.<br />4. Quit Audacious and run it from terminal like this:<br /><pre><code class="ruby syntaxhl"><span class="CodeRay">audacious -p <span class="string"><span class="delimiter">'</span><span class="content">/usr/share/sounds/alsa/Front_Center.wav</span><span class="delimiter">'</span></span>
</span></code></pre></p>
<p>5. Let Audacious play this short file repeatedly for several minutes. You may want to mute Audacious in <em>pavucontrol</em>.<br />6. If no errors appear in Audacious output after 10 minutes, try a different sleep interval. I get more than one error per minute with the interval 0.1. But I also get at least one error in less than 10 minutes with intervals 0.01, 0.05, 0.2 and 0.5.<br />7. Quit Audacious and examine its output. Possible result:<br /><pre><code class="ruby syntaxhl"><span class="CodeRay"><span class="error">$</span> audacious -p <span class="string"><span class="delimiter">'</span><span class="content">/usr/share/sounds/alsa/Front_Center.wav</span><span class="delimiter">'</span></span>
<span class="constant">ERROR</span> alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
ERROR alsa.cc:<span class="integer">253</span> [get_delay_locked]: snd_pcm_recover <span class="key">failed</span>: <span class="constant">Input</span>/output error.
WARNING strpool.cc:<span class="integer">181</span> [operator()]: <span class="constant">String</span> <span class="key">leaked</span>: sounds - alsa - <span class="constant">Front_Center</span>
<span class="constant">WARNING</span> strpool.cc:<span class="integer">181</span> [operator()]: <span class="constant">String</span> <span class="key">leaked</span>: <span class="key">file</span>:<span class="regexp"><span class="delimiter">/</span><span class="delimiter">/</span></span>/usr/share/sounds/alsa/<span class="constant">Front_Center</span>.wav
<span class="constant">WARNING</span> strpool.cc:<span class="integer">181</span> [operator()]: <span class="constant">String</span> <span class="key">leaked</span>: <span class="constant">Microsoft</span> <span class="constant">WAV</span> (signed <span class="integer">16</span> bit)
<span class="constant">WARNING</span> strpool.cc:<span class="integer">181</span> [operator()]: <span class="constant">String</span> <span class="key">leaked</span>: wav
<span class="constant">WARNING</span> strpool.cc:<span class="integer">181</span> [operator()]: <span class="constant">String</span> <span class="key">leaked</span>: <span class="constant">Mono</span>, <span class="integer">48</span> kHz
<span class="constant">WARNING</span> strpool.cc:<span class="integer">181</span> [operator()]: <span class="constant">String</span> <span class="key">leaked</span>: <span class="regexp"><span class="delimiter">/</span><span class="content">usr</span><span class="delimiter">/</span><span class="modifier">s</span></span>hare/sounds/alsa
<span class="constant">WARNING</span> strpool.cc:<span class="integer">181</span> [operator()]: <span class="constant">String</span> <span class="key">leaked</span>: sounds
<span class="constant">WARNING</span> strpool.cc:<span class="integer">181</span> [operator()]: <span class="constant">String</span> <span class="key">leaked</span>: alsa
<span class="constant">WARNING</span> strpool.cc:<span class="integer">181</span> [operator()]: <span class="constant">String</span> <span class="key">leaked</span>: <span class="constant">Front_Center</span>
<span class="constant">WARNING</span> runtime.cc:<span class="integer">364</span> [aud_leak_check]: <span class="constant">Bytes</span> allocated at <span class="key">exit</span>: <span class="integer">160</span>
</span></code></pre></p>
<p>8. Expected result: empty output.<br />9. Note that the <em>String leaked</em> warnings don't appear every time. Perhaps once in three such tests on average.<br />10. In case you don't have an audio file at the specified path, I'm attaching mine to this bug report. The path to the file shouldn't matter. The bug is not limited to this particular file, but it allows to reproduce the issue with minimum effort due to its short duration.<br />11. I have reproduced this bug with <em>audacious</em> and <em>audacious-plugins</em> built from current git master: <a class="external" href="https://github.com/audacious-media-player/audacious/commit/ffd9ac46a43f3fb0e02d06adf382291f82037a16">https://github.com/audacious-media-player/audacious/commit/ffd9ac46a43f3fb0e02d06adf382291f82037a16</a> ; <a class="external" href="https://github.com/audacious-media-player/audacious-plugins/commit/89b6ab575ec823b67655bea2fbd2dc7429465377">https://github.com/audacious-media-player/audacious-plugins/commit/89b6ab575ec823b67655bea2fbd2dc7429465377</a> (built both in Debug and Release modes)</p> Audacious - Feature #969 (New): streamtuner plugin: Please add column-sortability, or at least so...http://redmine.audacious-media-player.org/issues/9692020-04-16T17:45:55ZJim Turnerturnerjw784@yahoo.com
<p>Please sort, and add ability for user to click column headers to sort - this is hard on the eyes browsing markets and stations!</p>
<p>Thanks,</p>
<p>Jim</p> Audacious - Feature #956 (New): Stream to chromecasthttp://redmine.audacious-media-player.org/issues/9562020-04-08T18:15:53ZJeroen Steenhuis
<p>It would be nice to have a plugin to stream the music directly to a chromecast for using remote speakers (instead of the crappy laptop speakers)</p> Audacious - Feature #908 (New): Use QtXml instead of libxml2http://redmine.audacious-media-player.org/issues/9082019-10-26T13:44:41ZAriadne Conillariadne@dereferenced.org
<p>Once we drop GTK support, it would be nice to drop libxml2 dependency altogether by rewriting the code that uses it to use QtXml instead. This removes a dependency and QtXml has a nicer API.</p> Audacious - Feature #870 (New): View > Show Playlist and View > Show Playback Controlshttp://redmine.audacious-media-player.org/issues/8702019-02-07T16:36:04ZIFo Hancroft
<p>Add the ability to hide the playback controls (search library, open files, add files, play, pause, etc) from the View Menu, just like we can hide the Menu Bar, Status Bar, Info Bar, etc.<br />Also, the ability to hide the playlist part of the window, via the View Menu.</p> Audacious - Bug #859 (New): .wsz skins cannot be used on Windowshttp://redmine.audacious-media-player.org/issues/8592019-01-10T05:13:52ZJohn Lindgrenjohn@jlindgren.net
<p>The current scheme uses the external "unzip" program which generally isn't present on Windows.</p>
<p>We could ship an "unzip.exe" along with the Windows build, but it would be better if we could read the .wsz/.zip files directly through the VFS layer, without running an external .exe and creating temporary files on the C: drive.</p> Audacious - Bug #196 (New): Wrong channel map when doing surround playbackhttp://redmine.audacious-media-player.org/issues/1962012-10-12T03:10:33ZAdriano Mouraadriano.lols@gmail.com
<p>Seems that Audacious pulseaudio output plugin has never set an appropriate channel map. This little patch will use pa_channel_map_init_auto and assume WAVEEX style channel mapping. Audacious can now properly output any 5.1 file I trow at it.</p>
<p>Before:</p>
<pre><code>sample spec: float32le 6ch 88200Hz<br /> channel map: front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center<br /> resample method: copy<br /> module: 6<br /> client: 20094 &lt;Audacious&gt;</code></pre>
<p>Now:</p>
<pre><code>sample spec: float32le 6ch 88200Hz<br /> channel map: front-left,front-right,front-center,lfe,side-left,side-right<br /> Surround 5.1<br /> resample method: copy<br /> module: 6<br /> client: 20114 &lt;Audacious&gt;</code></pre>
<p>For correct 4.0/6.1/7.1 surround mappings you will need some pulseaudio patches, but I'm still working on this. WAVEEX seems to be wrongly implemented in pulseaudio right now.</p>